Solid state hf pipe welding machine in the operation, there are many details to pay attention to above. It is very important to use solid state high-frequency pipe welding machine in a safe environment. As operators, it is necessary to develop good habits and avoid unnecessary damage.
One, machinery above the adjustment of the workers must be through three months up time to follow the class learning, at the same time to three months up time through the coach operation. Master the operation method of each switch of the console, and can measure the circumference of the pipe skillfully, and can coordinate and control the circumference of the pipe skillfully with the internal welders instrument. After the training, the examination and verification should also be carried out, if qualified, you can take the certificate to work.
Two, to apply the method of cold coil forming, with VZH type pipe unit, the same equipment and instruments must be intact.
Three, operators in the use of machinery before, what must do is to be familiar with the current specifications and process to produce what kind of stainless steel pipe.
Four, to pay attention to the position and state of the forming wheel, feeding table Angle and plate width size must be consistent.
5. At least one measurement of the welding girth of the solid state high-frequency pipe welding machine shall be carried out every other screw week, and notes shall be taken to ensure good data records.
Six, in the adjustment of the pipe circumference, if we choose the point movement into the corner of the table, we must do a good job with the internal welder handover and cooperate with it.
7. Each screw week shall also conduct more than one external welding to delimit the line inspection line.
Eight, the coordination slogan to ring, before the machine open, we do a coordinated preparation, and loudly shouted the slogan "boot" "boot".
Nine, in the process of machine operation, it is necessary to pay attention to the host of the work of each post. If something happens to you, yell "stop" as you stop.
Make good adjustment, so that each position of the staff should be coordinated, in order to achieve a stable pipe forming standards and final results.
You must be careful when using solid state high frequency pipe welding machine. Correct operation of solid state high frequency pipe welding machine.